Advanced Cleaning Upgrade

Complete HVAC & Air System Cleaning


A fully cleaned air system, down to its component level, gives the best opportunity for dramatically improving indoor air quality. When mold, smoke or harmful odors become a problem, those particles and their mycotoxins circulate throughout the entire system, not just air ducts.


We are committed to using safe and high-quality products in everything we do. From decontamination and disinfection – all the way to smoke damage and puff-backs.

Cutaway diagram of an air conditioning system: outdoor unit with compressor and condenser, indoor unit with blower and filter.

Our professionals tailor comprehensive cleaning plans to each system.

Air filter purifying air; pollutants enter, clean air exits.

Evaporative Coil Cleaning

Their main purpose is to remove heat and humidity from the circulating inside-air during the cooling season. E-coils are often the most overlooked source of odors and bacterial growth. A proper coil cleaning can be the single most impactful service upgrade.

  • Our process:

    Before / after measurement of airflow velocity & pressure drop - temporarily remove coil & pvc - contact vacuum brush cleaning / compressed air wash - low pressure wash & dry steam @ 65 psi using BBJ Power Coil Clean - repair damaged coil fins - flush drain line / pan - hand clean using botanical degreaser - restore coil & pvc

Four-bladed fan icon with blue motion lines.

Blower Motor Cleaning

Responsible for moving the conditioned air through the ahu and ductwork. Dirty blowers can lead to several health issues in your air system if not addressed. They could also waste energy and have mechanical failure, if not taken appropriately cleaned.

  • Our process:

    Dismount control board, door switch & bracket - clean individual blades / housing using wire brush, dry steam, compresse air & botanical degreaser - apply Decon30 Botanical Disinfectant - reinstall blower & electronics

A yellow-ringed symbol with a diagonal line through blue bacteria and black dots, indicating no germs.

Anti-Microbial Treatment

Always using safest cleaning products, like Benefect, is an important commitment we’ve made. After the duct cleaning is complete, and while still under negative vacuum pressure, our techs can fog a botanical disinfectant through the cleaned system.

Blue shield protecting against yellow virus.

Smoke & Odor Treatment

When disaster hits, an experienced and high-quality contractor becomes more important than ever. Fire can create various types of smoke, each needing to be targeted differently, same as a furnace puff-back or nicotine damage. We trust Sentinel 500-line products for delivering that specialized demand when faced with these project scopes.

Square icon with a circle and horizontal lines inside.

Dryer Vent Cleaning

Only 1-inch of lint buildup can reduce dryer efficiency by 44%, increasing your energy bill and risk of fire. Restoring proper airflow helps your system run efficiently and clothes dry faster.

  • Our process:

    C-Det certified technicians measure before / after airflow - remove build-up from take-off to termination - use compressed air / brushes & vacuum collection – clear dryer internal exhaust - botanical wipe down - visual inspection

Fan within a coil, likely an air conditioner component.

Condensate Coil Cleaning

Located outside, their purpose is to release heat from the refrigeration into the outside, which helps cool it into a liquid state. Keeping these clean and at peak performance, lets you avoid unintended moisture pushed through your system and can save from wasted energy.

  • Our process:

    Type 2 wet cleaning - wash using biodegradable BBJ Power Coil Clean - access internal coil via extension wand - complete rinse - botanical degreaser wipe down

Electric fan with plug. Blue blades in a yellow circle, plugged in.

Bathroom Exhaust Cleaning

Often overlooked but an effective way of managing bathroom moisture, keeping ahead of odor removal and saving a little energy.

  • Our process:

    C-Det certified technicians air wash bathroom exhaust duct - isolate power & dismantle housing - remove build-up & blockages – use compressed air tools & vacuum collection - hand clean using botanical products

Air conditioner with a gear above it and cooling airflow below.

Mini-Splits

Avoiding the need for ductwork doesn’t stop dust and organic buildup inside the coil assembly – leading to odors, reduced performance, and poor indoor air quality. We use high-pressure steam cleaning to break down contamination safely and clean thoroughly.

  • Our process:

    Dismantle unit - contact vacuum brush cleaning / compressed air wash - low pressure wash & dry steam @ 65 psi using BBJ Power Coil Clean - repair damaged coil fins - clear drain line- clean case body using botanical degreaser

A building with three wavy lines inside it.

More

Restoring indoor air quality can sometimes require additional solutions. Our customized cleaning plans help overcome even the worst damage, with things like; mold testing, drain pan treatment, duct replacement or repair, HEPA air scrubbers, hydroxyl treatment, and help from trusted HVAC and structural restoration contractors.

Diagram of a heat pump: shows air flow through condenser, compressor, blower, heating, and cooling sections.

Commercial Customers


Commercial and industrial HVAC systems have added complexities. Whether its rooftop packaged units, complex blueprints or internal monitoring devices – our experience and work practices ensure safe, efficient cleaning with minimal disruption to your building and business.


After your free commercial inspection, we’ll deliver a proposal with additional steps tailored to your business needs and then work together coordinating a schedule.


  • Hospitals
  • Manufacturing
  • Corporate Buildings
  • Government Facilities
  • Food Industry